Products

We offer comprehensive solutions for manufacturing and processing industries as well as standard products and systems for industrial applications,office and residential buildings and defence projects. Targeting the electrical contracting & construction industries we offer high quality distribution equipment from 0.5A to 3200A in harmony with this a building management system. These help in providing both control and protection for residential and commercial projects.

Fuse Systems

Fuses are used in a wide range of applications, extending from residential installations to installations in commercial buildings and industrial installations to installations in power supply companies.

	Low rated power losses for high economy and minimal heating
	Safe rated breaking capacity from the lowest inadmissible
	overload current up to the highest short-circuit current
	High current limiting to protect every part of the system installation
	High resistance towards aging to avoid unnecessary system malfunctions
	Constant characteristics even in different temperature conditions
	Wide range of practical accessories also to enhance shock-hazard
	protection

Miniature Circuit Breakers

MCBs primarily protect cables and conductors against overload and short circuit. They also protect electrical equipment against overheating.Further, due to the fixed rated current settings of MCBs, it is also possible to protect motors in a limited form.

	High rated breaking capacity up to 10 000 A
	Add-on accessories, quick mounting on site using snap-on mechanism
	Combined terminal allows busbar and feeder cable to be simultaneously
	connected
	Separate switch position indicator (5SX7)
	Insertion guide for fast and easy access to the terminal
	Handle locking device effectively prevents unauthorized operation

Residual Current Operated Circuit Breakers
Protection against indirect contact (indirect personnel protection). Protection is provided by disconnecting hazardous high touch voltages caused by a short circuit to exposed conductive parts of equipment.
When using RCCBs with IDn 30 mA, protection from direct contact (direct personnel protection) is also provided. Supplementary protection measure by disconnection when normally live parts are touched.
While RCCBs for a rated fault current IDn > 30 mA provide protection against indirect contact, by installing RCCBs with IDn Ł 30 mA, a high level of additional protection is achieved against unintentional direct contact with live parts.

The usual contact description, such as “16 A cos j = 1 or AC-1”, is not sufficient when configuring lighting systems. Excessive inrush currents result in contact welding, which means that the devices can no longer be switched off.

	Contactor contacts with a contact opening >3 mm, as for contactors
	Relay contacts with a contact opening >3 mm, as for the remote switches
	Manually operated contacts with a contact opening >3 mm, like the
	disconnectors
	Relay contacts with micro contacts (>0.5 mm contact opening), for
	example which are used for PC boards in electronic devices.

Electrical equipment for rooms used for medical purposes, e.g. hospitals, doctors’ surgeries and also for home dialyses are subject to special requirements. The health or the life of a patient can be endangered, even if an extremely low current flows through the human body. This danger exists when electromedical equipment is used to treat, examine or monitor the patient.
Therefore, electrical installations in rooms used for medical purposes must incorporate additional protective measures. This involves protective measures using an IT network with insulation monitoring. With this protective measure, when the first fault occurs, the supply is not disconnected and safe operation can continue.

In functional buildings, where rated operating currents up to 250 A are possible, the MCB circuit-breakers of the 5SX2 series are installed on a vertically mounted rail system in the STRATUM 400. Models are available offering from 4 to 24 ways.

	Removable gland plates and cut-away side channels provides easy access
	and speeds installation time.
	With all the main circuits totally insulated the installer has total protection
	from live circuits.
	Flush gland plate fixing at the top and bottom allow additions of modular
	enclosures, housing larger incoming devices or control devices .
	Cable access under the pan assembly helps reduce installation time and
	simplifies routing of cables into conduit.
	The distribution board comes complete with 9 insulated busbar shrouds
	and aperture blanks.
	100 A devices fix directly onto main busbar for optimum electrical connection.

	250 A or 400 A busbar
	IP 30
	Outgoing MCCBs 16 A to 100 A 18 kA rating
	Incomer supplied fitted as standard
	Suitable for top or bottom entry
	Supplied with earth and neutral connectors (1 per TP way).

	Main busbars fault rated up to 35 kA for 1 sec RMS, SYM at 415 V, 50 Hz.
	IP 40
	Fully segregated construction conforming to BS EN 60 439-1.
	Fabricated from 1.5 mm thick sheet, rust protected and epoxy/polyester
	powder coated light grey to RAL 7035.
	Full complement of accessories, meterpacks, cable spreader boxes,
	side mounting cable box, floor mounting plinth, extension enclosures
	Dead front cover and lift off hinged door.
	Electroplated busbars available on request for export applications.

Siemens circuit-breakers can take on any switching and protection function in AC or DC networks and they are designed to meet the most demanding requirements and make a significant contribution to reliable protection of the energy supply in electrical plants, buildings, power stations,water stations, ships or drilling rigs.

The Siemens circuit-breaker family comprises units designed for widely differing power ranges, e. g. current limiting circuit-breakers up to 2500 A,100 kA or open circuit-breakers for rated currents up to 6300 A, 100 kA at full selectivity.

The 3VF circuit-breakers in compact form meet the latest stringent requirements on overload and short-circuit protection for nominal currents of up to 2500 A. Various circuit-breaker variants with different switching capacities optimized for special types of applications ensure that a solution is always available that is optimally adapted to specific switching and protection tasks as regards economy.

	compact circuit-breaker
	matching the short-circuit current at the installation site to
	optimize economy
	for installation and motor protection and starter assemblies
	rated currents from 10 to 2500 A and operational voltages up
	to 690 V AC
	switching capacity up to100 kA for up to 415 V
	suitable for use in any climate
	wide range to choose from 3 & 4 poles and mounting version

3WS1circuit-breakers are intended for use in enclosed areas, where excessive operating conditions do not occur (e.g. no dust, aggressive vapors or harmful gases). The permissible ambient temperatures and the associated rated currents for different ambient temperatures are listed in the technical data.In case of heavy short-circuits the operators are not endangered even when the installation door is open.

	High level of safety for personnel when switching on existing
	short-circuits.
	High number of short-circuit breakings and electrical endurance.
	Environment friendly, since no arcing gases are emitted.
	For rated voltages up to 1000 V.
	Low-maintenance circuit-breakers: The vacuum interrupters are
	maintenance-free.
	Optional feed-in from top or bottom
	Univocal switching-state indicator with auxiliary signaling contact